Posts Tagged ‘Johnson and Johnson’

Keefe Bartels Appointed Co-Lead Counsel for DePuy ASR Hip Implant Litigation in New Jersey

Tuesday, May 10th, 2011

Red Bank, N.J. – May 10, 2011 – Today the Court appointed Keefe Bartels as co-lead counsel in the DePuy ASR hip implant litigation for the State of New Jersey.  The Court’s Order ratified Keefe Bartels’s election to the post by participating lawyers from New Jersey and other parts of the country.  Previously, the New Jersey Supreme Court had assigned all pending and future New Jersey state-court hip implant litigation to Bergen County for centralized management by the Honorable Brian R. Martinotti.

DePuy is a wholly-owned subsidiary of Johnson & Johnson, headquartered in New Brunswick, NJ.  DePuy Orthopedics manufactured the ASR Hip Replacement System.  Worldwide implants of the DePuy ASR XL Acetabular System and the ASR Hip Resurfacing System implants totaled approximately 93,000.  The ASR Hip Implant has a troubled domestic and international history.  In 2009, due to defects, Johnson & Johnson discontinued these implants.  High failure rates necessitated an August 26, 2010 recall.

John E. Keefe, Jr., a co-managing member of Keefe Bartels, stated:

We are honored and excited that our firm will remain on the cutting edge of this litigation. Keefe Bartels began investigating claims from patients with ASR Hip Implant replacements over a year before the August 2010 recall. We are eager to aggressively litigate these claims. We are especially pleased to litigate against Johnson & Johnson in its home state of New Jersey.  New Jersey’s strong and independent judiciary provides an experienced and fair forum for the efficient litigation and trial of these cases.

Joshua S. Kincannon leads the medical device litigation team at Keefe Bartels.  He explains: 

This case is about information, both for plaintiffs and defendants.  For Defendants, a crucial question is ‘What did they know and when did they know it?’  We look forward to working with New Jersey lawyers as well as plaintiffs’ counsel from across the country in answering that and other questions as we help victims and their families who have been injured by one of these devices.

For more information about these cases, or for a free consultation, contact Joshua S. Kincannon at 1-877-ATTY-247 or visit www.defectivejoints.com www.keefebartels.com.

Update: DePuy Recalls Defective A.S.R. Hip Implant, But High Failure Rates Continue

Friday, February 4th, 2011

Depuy ASR Hip RecallThis past December 2010, the New York Times reported that Johnson & Johnson’s DePuy A.S.R. hip implants have been “failing worldwide at unusually high rates after just a few years.”Despite being promoted as a breakthrough in hip replacements, the faulty DePuy A.S.R. (which stands for Articular Surface Replacement) is now being called “one of the most troubled orthopedic implants of the past decade.”

Although evidence of the defective A.S.R. hip implant had been mounting for years, DePuy Orthopaedics, a division of Johnson & Johnson and the world’s leading manufacturer of hip implants, has continued to claim that there were no problems with the troubled A.S.R.  (more…)

Metal on Metal Implants – Important Risk Information

Tuesday, June 15th, 2010

Metal on metal hip implants account for approximately one-third of the 250,000 hip implants done in the United States annually.  However there is mounting evidence that these implants may be defective, and that these defects may cause a variety of serious problems in patients.  Data from joint registries confirms that metal on metal implants are more likely to fail and require a revision surgery than any other bearing interface.

When a metal on metal hip implant is used in a total hip arthroplasty or a hip resurfacing surgery, the acetabular insert, which was typically made with a type of plastic known as ultra high molecular weight polyethylene, is instead made out of cobalt chromium, and articulates against a metal femoral head, which is also made of cobalt chromium.

The problem with this type of interface is multi-factorial.  When hip or knee implant components move against each other, the friction causes wear.  This happens with any medical device implant, just as it occurs with your god given joints.  The body attempts to rid itself of this particulate debris by carrying the particles away in the lymphatic system.  However, the wear particles that are produced from a metal on metal implant may be detrimental to patients’ health in a number of ways.   (more…)